Commander 4WD V8-4.7L VIN N (2006)
Fluid Line/Hose: Service and Repair
Transmission Cooler Line Quick Connect Fitting
TRANSMISSION COOLER LINE QUICK CONNECT FITTING DISASSEMBLY/ ASSEMBLY
DISCONNECT
1. Remove dust cap by pulling it straight back off of quick connect fitting.
2. Place disconnect tool Special Tool 8875A onto transmission cooler line with the fingers of the tool facing the quick connect fitting.
3. Slide disconnect tool down the transmission line and engage the fingers of the tool into the retaining clip. When properly engaged in the clip, the
tool will fit flush against the quick connect fitting.
4. Rotate the disconnect tool 600 to expand the retaining clip.
5. While holding the disconnect tool against the quick connect fitting, pull back on the transmission cooler line to remove.
CONNECT
