Commander 4WD V8-4.7L VIN N (2006)
1. Recover the refrigerant from the refrigerant system.
2. Drain the engine cooling system.
3. Disconnect and isolate the negative battery cable.
4. Remove the front floor console.
5. Remove the instrument panel.
6. Disengage the push-pin retainer (1) that secures the front console duct (2) to the gear selector (3).
7. Disconnect the front console duct from the air distribution housing (4) and remove the console duct.
8. Remove the screws (5) that secure the gear selector to the floor panel (6) and position the gear selector out of the way.
9. Disconnect the left rear floor duct (1) and the right rear floor duct (2) from the rear floor distribution duct (3).
10. Disconnect the rear floor distribution duct from the air distribution housing (4) and remove the distribution duct.
11. Disconnect the right front floor duct (5) and the left front floor duct (6) from the air distribution housing and remove the floor ducts.
