Commander 4WD V8-4.7L VIN N (2006)
Audible Warning Device: Description and Operation
Part 2
-
Four-Wheel Drive System In Neutral Warning - On vehicles equipped with a Quadra-Trac II(R) transfer case, the EMIC transducer will
generate one short chime each time the 4WD SYSTEM IN NEUTRAL textual message is displayed by the reconfigurable display in the
instrument cluster. This warning confirms that a NEUTRAL shift request for the electronically controlled transfer case has been successfully
completed.
-
Gate Ajar Warning - The EMIC transducer will generate one short chime when a LIFTGATE OPEN textual message and icon are displayed by
the reconfigurable display in the instrument cluster. This warning indicates that the liftgate is not closed or completely latched while the vehicle is
moving.
-
Glass Ajar Warning - The EMIC transducer will generate one short chime when a LIFTGLASS OPEN textual message and icon are displayed by
the reconfigurable display in the instrument cluster. This warning indicates that the liftgate flip-up glass is not closed or completely latched while
the vehicle is moving.
-
Head/Park Lamps-On Warning - The EMIC transducer will generate repetitive chimes at a fast rate to indicate that hard wired inputs from the
headlamp switch and the ignition switch indicate that the exterior lamps are turned ON with the ignition switch in the OFF position, and either a
hard wired input or an electronic message is received over the CAN data bus indicating that the driver side front door is open. The chimes will
continue to sound until the exterior lamps are turned OFF, the driver side front door is closed, or the ignition switch is turned to the ON position,
whichever occurs first.
-
Hood Ajar Warning - On vehicles sold in a market where a hood ajar switch is required equipment, the EMIC transducer will generate one short
chime each time a HOOD OPEN textual message and icon are displayed by the reconfigurable display in the instrument cluster. This warning
indicates that the hood is not closed or completely latched while the vehicle is moving.
-
Key-In-Ignition Warning - The EMIC transducer will generate repetitive chimes at a fast rate to indicate that hard wired inputs from the key-in
ignition switch and the ignition switch indicate that the key is in the ignition lock cylinder with the ignition switch in the OFF position, and either a
hard wired input or an electronic message is received over the CAN data bus indicating that the driver side front door is open. The chimes will
continue to sound until the key is removed from the ignition lock cylinder, the driver side front door is closed, or the ignition switch is turned to
the ON position, whichever occurs first.
-
Low Brake Fluid Warning - The EMIC transducer will generate one short chime when a LOW BRAKE FLUID LEVEL textual message is
displayed by the reconfigurable display in the instrument cluster. This warning indicates that the monitored fluid level in the brake master cylinder
is low.
-
Low Coolant Warning - The EMIC transducer will generate one short chime when the COOLANT LOW textual message and icon are displayed
by the reconfigurable display in the instrument cluster. This warning indicates that the monitored engine coolant level in the coolant reserve bottle
is low.
-
Low Fuel Warning - The EMIC transducer will generate one short chime when the FUEL LOW textual message and icon are displayed by the
reconfigurable display in the instrument cluster. This warning indicates that the monitored fuel level in the fuel tank is low. This chime will only
occur once during any ignition cycle.
-
Low Oil Pressure Indicator Warning - The EMIC transducer will generate one short chime when the low oil pressure indicator is illuminated
and the engine speed is greater than 300 revolutions per minute. This warning indicates that the monitored engine oil pressure is low.
-
Low Wash Warning - The EMIC transducer will generate one short chime when the WASHER FLUID LOW textual message and icon are
displayed by the reconfigurable display in the instrument cluster. This warning indicates that the monitored washer fluid level in the washer
reservoir is low.
-
Memory System Warning - On vehicles equipped with the optional memory system, the EMIC transducer will generate one short chime each
time a memory recall request is received and a MEMORY SYSTEM DISABLED
-
SEATBELT FASTENED textual message and icon, or a MEMORY SYSTEM DISABLED - VEHICLE NOT IN PARK textual message is
displayed by the reconfigurable display in the instrument cluster. A single short chime will also be sounded each time a memory recall request is
received while the memory system is inhibited due to a vehicle speed input that is greater than zero.
-
Overspeed Warning - The EMIC transducer will generate one short chime when the WARNING! LIMIT SPEED textual message is displayed by
the reconfigurable display in the instrument cluster. This warning indicates that the vehicle speed is over a pre-programmed speed value. This
feature is only enabled on vehicles that have been configured for sale in a Middle East Gulf Coast Country (GCC).
-
Park Assist System Warning - On vehicles equipped with the optional park assist system, the EMIC transducer will generate one short chime
when the PARK ASSIST DISABLED textual message is displayed by the reconfigurable display in the instrument cluster. This warning indicates
that the park assist system has been manually disabled using the park assist switch. On vehicles with only the rear park assist system this chime
warning will only occur as the gear selector lever is being moved from any position except REVERSE or NEUTRAL into REVERSE or
NEUTRAL. On vehicles with the front and rear park assist systems this warning will only occur as the gear selector lever is being moved from the
PARK position into the REVERSE position.
-
Park Brake Reminder - The EMIC transducer will generate one short chime when the brake/park brake indicator is illuminated to announce that
the park brake is applied or not fully released and the vehicle is moving. This chime will only occur once during any ignition cycle.
-
Perform Service Reminder - The EMIC transducer will generate one short chime when the PERFORM SERVICE textual message is displayed
by the in the instrument cluster. This reminder occurs when the service distance is at or below zero (miles or kilometers), and will repeat at each
subsequent ignition cycle until the service distance is reset, increased or until the service reminder function is disabled. This chime will only occur
once during any ignition cycle.
-
Sentry Key Customer Learn Mode Announcement - The EMIC transducer will generate one short chime to confirm that the Sentry Key
electronic Customer Learn mode is active, which indicates that the Sentry Key Remote Entry Module/Wireless Control Module (SKREEM/WCM)
is prepared for programming additional sentry key transponders. This chime feature is only active on vehicles equipped with the optional Sentry
Key system, and sold in a market where Customer Learn programming is an allowed feature.
-
Service Exhaust Warning - The EMIC transducer will generate one short chime each time the SERVICE EXHAUST textual message is
displayed by the reconfigurable display in the instrument cluster. This warning indicates that a clogged or damaged diesel engine exhaust
