Commander 4WD V8-4.7L VIN N (2006)
1. Align the base of the bulb (2) with the socket (1) in the outboard side of the license plate lamp housing.
2. Push the bulb straight into the socket until the base is firmly seated.
3. Position the lens (3) over the lamp housing under the handle and light bar unit (2).
4. Engage the two tabs on the inboard side of the lens into the slots on the inboard side of the lamp housing.
5. Push the outboard side of the lens upward until the lens latch tab (1) is fully engaged in the lamp housing.
6. Reconnect the battery negative cable.
