Commander 4WD V8-4.7L VIN N (2006)
Map Light Bulb: Service and Repair
Rear
READING LAMP
BULB - REAR
REMOVAL
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the
socket and/or the lamp wiring.
1. Align the ends of the bulb (3) with the two bulb holders within the rear dome lamp housing (1).
2. Carefully press the bulb firmly and evenly into the bulb holders until it snaps into place.
3. Swing the notched end of the lens (4) up into position against the housing, then press upward on the lens firmly and evenly until it snaps into the
housing.
4. Reconnect the battery negative cable.
