Commander 4WD V8-4.7L VIN N (2006)
2005 - 2007
(RG)
Chrysler Voyager (International Markets)
2005 - 2007
(RS)
Town & Country/Caravan/Voyager
2009 - 2010
(RT)
Town & Country/Grand Caravan
2005 - 2006
(TJ)
Wrangler
2005 - 2006
(VA)
Sprinter
2007 - 2010
(VB)
Sprinter
2005 - 2010
(WH)
Grand Cherokee (International Markets)
2005 - 2010
(WK)
Grand Cherokee
2006 - 2010
(XH)
Commander (International Markets)
2006 - 2010
(XK)
Commander
2005 - 2010
(ZB)
Viper
2005 - 2007
(ZH)
Crossfire
DISCUSSION:
Chrysler Group vehicle fluid systems do NOT require regular flushing. These systems include: engine oil, transmission oil, axle lube, brake fluid, power
steering fluid, and refrigerant. The only exception to this requirement are published in the vehicle maintenance schedules, e.g. engine coolant.
Exceptions to this recommendation include only those instances where a failure has occurred and/or the system has become compromised, contaminated
or overheated beyond the normal operating range.
Chrysler Group does NOT recommend aftermarket chemicals to flush the engine, transmission, brake or steering systems. Chemicals contained in these
products can damage the system elastomeric components, and contaminate the component fluid, leading to loss of system/component durability and
service life. When necessary, only the original approved system fluid should be used to flush these components using teamPSE(R) approved equipment.
If the engine coolant contains a considerable amount of sediment, clean and flush with Mopar Cooling System Flush, p/n 04856977, or equivalent.
Follow with a thorough rinsing to remove all deposits and chemicals. Refill with a minimum of a 50% mixture of the specified coolant and distilled
water.
POLICY:
Information Only
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
