Commander 4WD V8-4.7L VIN N (2006)
LINE-A/C LIQUID
DESCRIPTION
NOTE: LHD model shown in illustration. RHD model similar.
The A/C liquid line (1) is the refrigerant line that carries refrigerant from the receiver/drier to the A/C expansion valve (2). The A/C liquid is serviced in
one section and is secured to the right side frame (3) rail by two plastic retainer clips (4).
CAUTION: Use only seals specified for the vehicle. Failure to use the correct seals will cause the refrigerant system connections to leak.
The A/C liquid line has no serviceable parts except for the O-ring and dual plane seal. The seals used on the connections are made from a special type of
rubber not affected by R-134a refrigerant. The seals must be replaced whenever the A/C liquid line is removed and installed.
If the A/C liquid line is found to be leaking or damaged, it must be replaced.
Line-A/C Suction
LINE-A/C SUCTION
DESCRIPTION
NOTE: LHD model with 4.7L engine shown in illustration. RHD model and other engines similar.
The A/C suction line (1) is the refrigerant line that carries refrigerant from the A/C evaporator, through the A/C expansion valve (2), to the A/C
compressor (3). The A/C suction line includes the low side service port (4).
CAUTION: Use only seals specified for the vehicle. Failure to use the correct seals will cause the refrigerant system connections to leak.
