Commander 4WD V8-4.7L VIN N (2006)
5. Remove and discard the O-ring (2) and then remove the disc brake rotor (1).
6. Remove the wheel speed sensor nut (2).
7. Remove the wheel speed sensor.
8. Remove the 3 hub bearing mounting bolts from the back of the steering knuckle. Remove hub bearing (3) from the steering knuckle.
INSTALLATION
1. Install the hub bearing (3) to the knuckle.
2. Install the hub bearing to knuckle and the 3 bolts then tighten to 115 Nm (85 ft. lbs.).
3. Install the wheel speed sensor.
4. Install the wheel speed sensor nut (2).
