Commander 4WD V8-4.7L VIN N (2006)
Electrical Accessory Panel: Description and Operation
Integrated Power Module
The Integrated Power Module (IPM) (2) is a combination of a printed circuit board based module that contains fuses and relays and the Front Control
Module (FCM) (3). The FCM contains electronics that control the IPM as well as other vehicle functions. The IPM connects directly to the battery
positive via a stud located on top of the unit. The ground connection is via electrical connectors. The IPM provides the primary means of voltage
distribution and protection for many vehicle systems.
The IPM (2) is located in the engine compartment, next to the battery (5) and in front of the Power Distribution Center (PDC) (1). It is secured to a
bracket with three locating slots that snap onto the bracket tabs holding it securely in place. The printed circuit board portion of the IPM cannot be
repaired and must be replaced if inoperative or damaged.
All of the current from the battery and the generator output enters the integrated power module via a stud on the top of the module. Internal connections
of all of the power distribution center circuits is accomplished by a combination of bus bars and a printed circuit board.
