jeep Workshop Repair Guides

Jeep Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 13
background image

Fig.14 Splice Band

3. Place the strands of wire overlapping each other inside of the splice clip.

Fig.15 Crimping Tool

4. Using crimping tool, Mopar p/n 05019912AA, crimp the splice clip and wires together.

Fig.16 Solder Splice

5. Solder the connection together using rosin core type solder only.

CAUTION:  DO NOT USE ACID CORE SOLDER.

Powertrain Management > Computers and Control Systems > Engine Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 2682

< PREV PAGE NEXT PAGE >