Commander 4WD V8-4.7L VIN N (2006)
5. Position new gasket between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve and into intake manifold. Install two bolts (4) finger tight (temporarily).
7. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
8. Connect electrical connector (5) to top of EGR valve solenoid (2).
9. Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications.
