Commander 4WD V8-4.7L VIN N (2006)
13.
At the "Home" page, open the "Powertrain Control Module Initialization" link.
14.
Open the "Coding String Calculator for Sprinter & Crossfire Vehicles" link.
15.
Open the "Select Module" pull down menu and select "PCM".
16.
Select the appropriate "Transmission Type" button (Manual or Automatic).
17.
Carefully enter the 17 character VIN.
18.
Carefully enter the PCM pin located on the new PCM.
19.
Select the "Calculate" button at the bottom of the window.
NOTE:
TechAUTHORITY will automatically populate the "Coding String", "SCN", and "CheckSum" information.
20.
Print the information from the technician's PC or accurately record the information.
21.
Using the DRBIII(R) select: "1. DRBIII(R) Standalone"
22.
"1.1998 - 2007 Diagnostics"
23.
Make the appropriate selection: "5. 2004 - 2006 Crossfire" or "6. 2002 - 2006 Sprinter"
24.
"1. System Select"
25.
"1. Engine"
26.
"9. Miscellaneous Functions"
27.
"2. Module Service Replacement"
28.
Follow the on screen instructions and carefully enter the "Coding String", "SCN" "CheckSum" and VIN information into the DRBIII(R)**
NOTE:
If one or more errors were made entering the data in step 28, the DRBIII(R) will display an error and ask that the data be checked and re-input as
necessary.
29.
Follow the DRBIII(R) "On Screen" prompts until 'Module Replacement Successful" message is displayed.
PCM INITIALIZATION PROCEDURE SEBRING COUPE/STRAUS COUPE (ST):
1.
Perform the "Registration Procedure" described in service bulletin 08-036-04. This service bulletin, including the password, is available on the
internet under the "Powertrain Control Module Initialization" link.
POLICY:
Information Only
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
