Commander 4WD V8-4.7L VIN N (2006)
9. Connect the front (1) and rear (2) drain tubes to the sunroof.
10. Adjust the sunroof glass.
11. Connect battery negative cable.
12. Install the vehicle headliner.
13. Perform the sunroof position calibration. See: Body and Frame/Roof and Associated Components/Sunroof / Moonroof/Testing and
Inspection/Programming and Relearning/Sunroof Position Calibration
14. Perform the Excessive Force Limitation (EFL) calibration.
15. Verify proper operation of the power sunroof system.