Commander 4WD V8-4.7L VIN N (2006)
The center upper anchor (2) is integral to the second row center seat cushion frame (1). This anchor is constructed from a heavy-gauge steel wire loop
that is securely welded to the back of the center seat cushion frame. The child restraint upper tether anchors cannot be adjusted or repaired and, if faulty
or damaged, they must be replaced as a unit with their respective seat back panels or seat cushion frame.
The lower anchors (2) are integral to the second row outboard seat cushion frames, which are secured with hinges and latches to the rear floor panel.
These anchors are each constructed from a heavy-gauge steel wire loop that is securely welded to the seat cushion frames. The child restraint lower tether
anchors cannot be adjusted or repaired and, if faulty or damaged, they must be replaced as a unit with the second row seat cushion frames.
OPERATION
See the owner's manual in the vehicle glove box for more information on the proper use of all of the factory-installed child restraint anchors.
