Commander 4WD V8-4.7L VIN N (2006)
6. Pull the foam seat back cushion (2) away from the front upper right corner of the center seat back frame far enough to access and remove the two
screws (1) that secure the retractor shield (3) to the seat back frame.
7. Remove the retractor shield from the seat back frame.
8. Remove the screw (3) from the back of the center seat back frame (2) that secures the retractor.
9. Remove the second row center seat belt and retractor unit through the opening in the front upper right corner of the seat back frame.
INSTALLATION