Commander 4WD V8-4.7L VIN N (2006)
Pedal Positioning Switch: Service and Repair
ADJUSTABLE PEDAL SWITCH
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel.
3. Remove the lower instrument panel switch pod fasteners.
4. Remove the lower instrument panel switch pod from the vehicle.
INSTALLATION
NOTE: There are different instrument panel switch pods available based on the option content of the vehicle. Ensure the switch pod being installed
matches the vehicle options.
1. Position the lower instrument panel switch pod into the instrument panel center bezel.
2. Install the lower instrument panel switch pod fasteners.
3. Install the instrument panel center bezel.
4. Connect the battery negative cable.
5. Verify system operation.
