Commander 4WD V8-4.7L VIN N (2006)
REMOVAL
1. Remove the hood ajar switch from the mounting bracket (3).
2. Remove the two screws (4) that secure the hood ajar switch bracket to the rivet nuts (2) in the left fender inner shield (1).
3. Remove the hood ajar switch bracket from the left fender inner shield.
INSTALLATION
1. Check to be certain that the two rivet nuts (2) that secure the hood ajar switch bracket screws to the left fender inner shield (1) are properly
installed and in good condition.
2. Position the hood ajar switch bracket (3) onto the left fender inner shield.
3. Install and tighten the two screws (4) that secure the hood ajar switch bracket to the left fender inner shield. Tighten the screws to 4 N.m (35 in.
lbs.).
4. Install a new hood ajar switch into the mounting bracket.