Commander 4WD V8-4.7L VIN N (2006)
Sunroof / Moonroof Switch: Description and Operation
SWITCH - SUNROOF
DESCRIPTION
The power sunroof switch (1) is a combination pushbutton and rocker switch module mounted in the overhead console (3). The sunroof switch is a direct
contact unit that is directly wired to the sunroof motor/ module assembly. The sunroof switch performs the following functions:
-
Power sunroof open (right side of switch pushed)
-
Power sunroof closed (left side of switch pushed)
-
Power sunroof vent (switch center button pushed)
The sunroof switch cannot be repaired and if damaged or inoperative must be replaced.
OPERATION
The power sunroof switch is hard wired to the sunroof motor/module assembly. The switch receives battery current from the motor/module when the
ignition switch is in the RUN and ACCESSORY positions or the vehicle Accessory Delay System is active. When one of the switch positions is pressed
it sends battery current back to the motor/ module, signaling it to move the power sunroof to the appropriate position. The motor/module will perform
one of the following functions:
-
Power sunroof open (right side of switch pushed)
-
Power sunroof closed (left side of switch pushed)
-
Power sunroof vent (switch center button pushed)