Commander 4WD V8-4.7L VIN N (2006)
Sunroof / Moonroof Switch: Service and Repair
SWITCH - POWER SUNROOF
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console from the vehicle.
3. Remove the screws (3) attaching the switch (4) to the overhead console.
4. Remove the switch (4) from the overhead console.
INSTALLATION
1. Position the sunroof switch (4) onto the overhead console.
2. Install the screws (3) securing the switch (4) to the overhead console.
3. Install the overhead console into the vehicle.
4. Connect the battery negative cable.