Commander 4WD V8-4.7L VIN N (2006)
7. Install the hub/bearing (3), Tighten to 115 Nm (85 ft. lbs.).
8. Install the axle shaft nut. Tighten the nut to 135 Nm (96 ft. lbs.).(if equipped with four wheel drive).
9. Install the wheel speed sensor (2) and reclip the wire to the knuckle.
10. Install the disc brake rotor (1).
11. Install the caliper adapter (1).
12. Install the tire and wheel assembly.
13. Perform wheel alignment.
