Commander 4WD V8-4.7L VIN N (2006)
6. Remove the cooler from the snap in brackets on the a/c condenser.
7. Remove the cooler (2) with hoses (1&3) from the vehicle.
INSTALLATION
1. Position and install the power steering cooler (2) with hoses (10) to the vehicle.
2. Snap cooler on the a/c condenser (2).
3. Reconnect the steering gear return line (3) from the gear to the cooler.
4. Reconnect the reservoir return hose (5) to the cooler.
5. Refill the power steering fluid and bleed the system.
6. Start engine and check for leaks.
