Commander 4WD V8-4.7L VIN N (2006)
1. Install the track bar (1) to the vehicle.
2. Pry in between the coil springs to install track bar bolt (3).
3. Install the track bar bolt (3) and nut (2) in the frame bracket.
4. Install the track bar (1) into the axle bracket.
5. Install the track bar bolt (3) and nut (2) in the axle bracket.
6. Install the left lower shock bolt to the axle Tighten to 115 Nm (85 ft. lbs.).
7. Remove the supports and lower the vehicle.
8. Tighten the upper mounting bolt/nut to 190 Nm (140 ft. lbs.). Tighten the lower mounting bolt/nut to 190 Nm (140 ft. lbs.)with full vehicle
weight.
