Commander 4WD V8-4.7L VIN N (2006)
NOTE: On 4X4 vehicles install the C-4212-F between the axle shaft and the lower control in order to allow the tool clearance to press the bushing in
and out.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper
operation during the removal and installation process.
1. Install the new clevis bracket bushing (3) into the lower control arm (5) using tools C-4212-F (Press) (1), 9653-3 (driver) (2), 9653-4 (Depth
gauge) (4) the depth gauge will automatically set the depth of the bushing (3) in the control arm (5).
2. Install the clevis bracket (3) to the shock (1).
