Commander 4WD V8-4.7L VIN N (2006)
3. Move the PDC (1) off to the side to access the four upper shock mount nuts (2).
4. Remove the four upper shock mount nuts (2).
5. Raise and support the vehicle.
6. Remove the tire.
7. Remove the two brake caliper adapter bolts.
8. Support the brake caliper adapter and caliper. Do not allow the caliper to hang by the brake hose.
9. Remove the disc brake rotor.
10. Remove the upper ball joint nut.
11. Separate the upper ball joint (2) from the knuckle (3) using special tool 8677 (1).
12. Remove the lower clevis bolt (3) at the lower control arm.
