jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Tire Pressure Monitor Receiver / Transponder|Description and Operation|Page 6247 > < Vehicle Lifting|Service and Repair|Page 6242
Page 1
background image

Tire Pressure Monitor Receiver / Transponder: Description and Operation

TRANSPONDER

DESCRIPTION - PREMIUM SYSTEM

A transponder is located in three of the four wheel wells of the vehicle to provide the WCM/SKREEM with the location of the tire pressure sensors on
the vehicle. The transponders are located in the left front, right front and right rear wheel wells. A fourth transponder is not necessary in the remaining
wheel well due to the process-of-elimination theory. Once the system knows the location of the first three sensors it assumes the location of the fourth
tire pressure sensor is in the left rear tire.

OPERATION - PREMIUM SYSTEM

Transponders located in three of the four wheel wells of the vehicle to provide the Wireless Control Module (WCM) commonly referred to as the
Sentry Key Remote Entry Module (SKREEM) with the location of the tire pressure sensors on the vehicle. The transponders are located in the left
front, right front and right rear wheel wells. A fourth transponder is not necessary in the remaining wheel well due to the process-of-elimination
theory. Once the system knows the location of the first three sensors it assumes the location of the fourth tire pressure sensor is in the left rear tire.

Tire Pressure Monitor Receiver / Transponder|Description and Operation|Page 6247 > < Vehicle Lifting|Service and Repair|Page 6242