Commander 4WD V8-4.7L VIN N (2006)
Fluid Line/Hose: Service and Repair
Transmission Cooler Line
TRANSMISSION COOLER LINE
REMOVAL
1. Remove grille.
2. Using Tool 8875A, disconnect transmission cooler tubes and power steering lines from the transmission oil/power steering cooler.
3. Remove the transmission cooler mounting bolts.
4. Remove transmission cooler from vehicle.
INSTALLATION
1. Position transmission oil/power steering cooler in vehicle.
2. Install transmission mounting bolts. Tighten to 14 Nm (123 inch lbs.).
3. Install transmission and power steering lines into cooler.
4. Install grille.