Commander 4WD V8-4.7L VIN N (2006)
5. Remove propeller shaft (1) from axle pinion flange (2).
INSTALLATION
1. Install shaft with reference marks aligned on companion flanges.
2. Install propeller shaft (1) flange (2) bolts and tighten to 108 Nm (80 ft. lbs.).
3. Install shaft (1) on transfer case flange (2).
4. Install bolts to transfer case flange (2) and tighten bolts to 32 Nm (24 ft. lbs.).
5. Install transmission crossmember.
