Commander 4WD V8-4.7L VIN N (2006)
Constant Velocity Joint Boot: Service and Repair
CV Joint/Boot-Inner Removal
CV JOINT/BOOT-INNER REMOVAL
1. Clamp shaft in a vise (with soft jaws) and support C/V joint (1).
2. Remove clamps with a cut-off wheel or grinder.
3. Slide boot down (2) the shaft.
4. Remove lubricant from housing (1) to expose the C/V snap ring (2) and remove snap ring.
5. Remove bearings (4) from the cage (1).
6. Rotate cage (1) 300 and slide cage off the inner race (2) and down the shaft (3).
