jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Body - Front Door Glass/Sticks/Binds/Express-Up Reversal|Page 10012 > < Body - Front Door Glass/Sticks/Binds/Express-Up Reversal|Page 10010
Page 19
background image

OVERVIEW:
This bulletin involves inspecting and correcting several possible front door glass issues.

MODELS:

2006-2007

(WH)

Grand Cherokee (International Markets)

2006-2007

(WK)

Grand Cherokee

2006-2007

(XH)

Commander (International Markets)

2006-2007

(XK)

Commander

SYMPTOM/CONDITION:

The customer may experience one or more of the following front door glass conditions:

^

Door glass reverses after express-up function is initiated. This condition may be due to the door control module not being initialized properly (not
run to full up or down during set-up), a regulator motor issue or the door glass binding in the system.

^

Door glass sticks, tracks poorly, pivots, or falls down inside door. This condition may be due to the glass not being installed correctly to the window
regulator clamps.

^

Door glass binds or tracks poorly. This condition may be due to the glass not being properly adjusted to the door or loose window hardware.

DIAGNOSIS:

If one or more of the above conditions are present, perform the Repair Procedure to the specific door that has the condition(s).

PARTS REQUIRED:

NOTE

The plastic retainers used to attach the door trim panel to the inner door panel must be replaced each time the door trim panel is removed.

REPAIR PROCEDURE:

1.

Reset the express-up module for the door window glass in question.

Body - Front Door Glass/Sticks/Binds/Express-Up Reversal|Page 10012 > < Body - Front Door Glass/Sticks/Binds/Express-Up Reversal|Page 10010