Commander 4WD V8-4.7L VIN N (2006)
Windshield Washer Spray Nozzle: Service and Repair
WASHER NOZZLE
FRONT
REMOVAL
1. From the underside of the hood, remove the push-in retainers that secure the hood silencer pad to the inner hood reinforcement (4) as necessary to
access the front washer nozzle (2 or 3) hose connections.
2. Disconnect the hose (1) from the barbed nipple of the front washer nozzle.
3. From the underside of the hood, release the integral latches of the front washer nozzle (1 or 2) and push the nozzle out through the mounting hole
toward the top side of the hood (3).
4. Remove the nozzle from the top of the hood panel.
INSTALLATION
