Commander 4WD V8-4.7L VIN N (2006)
1. The wiper blade (1) is removed from the rear wiper arm (3) while the arm support is engaged in the park ramp, which raises the blade and element
away from the liftgate and the glass.
2. To remove the blade from the wiper arm, squeeze the two latch release tabs (2) together while pulling the blade straight out from the receptacle in
the end of the arm.
INSTALLATION
1. Position the rear wiper blade (1) with the latching pivot pins aligned with the receptacle on the tip of the arm (3).
2. Slide the wiper blade pivot pins into the receptacle until they snap into place.