Commander 4WD V8-4.7L VIN P Flex Fuel (2007)
4. Install the lower clevis bolt at the lower control arm and tighten to 169 Nm (125 ft lbs).
5. Install the stabilizer link (6) at the lower control arm and tighten to 115 Nm (85 ft lbs).
6. Install the steering knuckle (3) to the upper ball joint (2) and tighten the nut (4) to 95 Nm (70 ft. lbs.).
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Perform wheel alignment.
Removal
REMOVAL
1. Raise vehicle and support the axle.
2. Remove the tire and wheel.
3. Remove the inner fender well (2).