Compass 2WD L4-2.0L VIN 0 (2007)
10. Through the opening in the bottom of the quarter trim panel, connect the wheel speed sensor cable connector (2) at the body wiring harness
connector (3).
11. If equipped, install the satellite receiver (1) or amplifier (2) to rear floor pan.
12. Install the rear floor pan silencer (1).
13. Install the cargo floor cover.
14. Perform the Diagnostic Verification Test and clear any faults. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/ABS Verification Test