Compass 2WD L4-2.0L VIN 0 (2007)
8. Fold the rear carpeting forward (1) to expose the parking brake cables (4) at the end of the rear floor.
9. Install the box end of a 1/2 inch (13 mm) wrench (2) over the retainer for either the right (3) or left (5) parking brake cable. Push the wrench onto
the retainer until the retainer fingers are collapsed. From under the carpeting, grasp the parking brake cable housing and pull the cable straight out
of the bracket attached to the floor.
10. Raise and support the vehicle.
11. Remove the wheel mounting nuts (3), then the rear tire and wheel assembly (1).
12. Access and remove the parking brake shoes.
