Compass 2WD L4-2.0L VIN 0 (2007)
e. Establish a connection with the StarMOBILE scan tool.
f.
Starting at the "Home" screen, select "ECU View".
g. Select "Misc Functions".
h. Select "Learn ETC".
i.
Follow the screen prompts.
j.
Clear any Diagnostic Trouble Codes (DTCs) as follows:)
NOTE:
Due to the "Learn ETC" procedure, DTC(s) may be set in other modules (PCM, TCM, ABS, BCM, MIC, WCM, etc.) within the vehicle, if so
equipped. Some DTC's may cause the MIL to illuminate.
1. From the "Home" screen select "System View".
2. Select "All DTCs".
3. Press "Clear All Stored DTCs" if there are any DTCs shown on the list.