Compass 2WD L4-2.4L (2008)
Rear Door Hinge: Service and Repair
Rear Door Hinge - Removal
REMOVAL
NOTE: It is not necessary to remove the door to replace the hinges if they are replaced one at a time.
NOTE: A suitable body sealant should be used when removing or moving the hinges.
1. Open the front door.
UPPER HINGE
1. Using a grease pencil or equivalent, mark the position of the hinge on the door and B-pillar.
2. Remove the nuts (1) attaching the hinge to the door (7).
3. Remove the bolts (3) attaching the hinge (2) to the B-pillar (1) and remove the hinge.
LOWER HINGE