Compass 2WD L4-2.4L (2008)
9. Once the shoe diameter is set, remove the tool and install the brake drum (4). See: Brake Drum/Service and Repair/Removal and
Replacement/Installation
10. Turn the brake drum. A slight drag should be felt while rotating the drum. If not, repeat the above procedure.
11. Install the tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
12. After adjusting both rear drum brakes as necessary, lower the vehicle.
13. Apply and release the parking brake lever one time after the adjustment process is completed checking parking brake operation.
14. Road test the vehicle stopping in both forward and reverse directions. The automatic-adjuster will continue to adjust the brakes as necessary during
the road test.