jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

A/C Line - Removal|Page 7022 > < A/C Line - Removal|Page 7020
Page 7
background image

17. Disconnect and isolate the negative battery cable.
18. Recover the refrigerant from the refrigerant systemSee: Service and Repair/Refrigerant System Recovery.
19. Raise and support the vehicle.
20. Remove the right front wheel See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Removal.
21. Remove the three push-pin retainers (1) and three screws (2) that secure the front portion of the right front wheelhouse splash shield (3) to body

(4) and position the front of the wheelhouse splash shield out of the way to gain access to the A/C accumulator.

22. Remove the nut (2) that secures the lower A/C suction line (3) to the A/C accumulator (1).
23. Disconnect the lower A/C suction line from the A/C accumulator and remove and discard the O-ring seal and gasket.
24. Install plugs in, or tape over the opened suction line fitting and the accumulator port.

A/C Line - Removal|Page 7022 > < A/C Line - Removal|Page 7020