Compass 2WD L4-2.4L (2008)
5. Apply a very light coating of grease to the splines in the clutch disc hub.
6. Position the clutch disc (2) to the flywheel (1). Make sure the side marked "FLYWHEEL SIDE" faces the flywheel (1).
7. Install the clutch pressure plate (1) to the flywheel and clutch disc. Finger tighten the six pressure plate-to-flywheel bolts.
8. Use Clutch Alignment Tool 6724 (3) to position the clutch disc (2) to the center of the flywheel (1).
