Compass 4WD L4-2.4L (2008)
Front Door Exterior Handle: Service and Repair
Front Door Exterior Handle - Installation
INSTALLATION
1. Install the lock cylinder (1), if equipped.
2. Install the handle (2) and install the screws (6).
3. Tighten screws (6) to 8 Nm (6 ft. lbs.)
4. Connect lock cylinder link rod (5) on to lock cylinder (1).
5. Connect handle link rod (4) on to door handle (2).
6. Install the bolster (3), See: Front Door Panel/Service and Repair/Front Door Trim Panel Bolster - Installation.