jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Instrument Panel|Page 7715 > < Instrument Panel|Page 7713
Page 1
background image

Speaker: Service and Repair
Sound Bar

Tweeter

1. Remove the sound bar from the vehicle as described.
2. Unplug the wire harness connector from the tweeter.

Sound Bar Speakers Remove/Install

3. Use a pair of side cutters to cut and remove the push-nut type retainer that secures the tweeter from the inside of the sound bar.
4. Push the tweeter out of the mounting hole from inside the sound bar.
5. Reverse the removal procedures to install. Always use a new retainer on the tweeter.

Woofer

1. Remove the sound bar from the vehicle as described .
2. Unplug the wire harness connector from the woofer.

Rear Door Speaker Remove/Install

3. Straighten the tabs that secure the speaker grille from the inside of the sound bar.
4. Remove the speaker grille from the outside of the sound bar.
5. Carefully drill out the four rivets that secure the woofer to the sound bar.
6. Remove the woofer from the sound bar.
7. Reverse the removal procedures to install. Use new rivets installed from the inside of the sound bar to secure the woofer.

Instrument Panel|Page 7715 > < Instrument Panel|Page 7713