Grand Cherokee 2WD L6-4.0L VIN S (1997)
Caliper Piston Installation
6. Press piston into caliper bore by hand, use a turn and push motion to work piston into seal.
7. Press caliper piston to bottom of bore.
Piston Dust Boot Installation
8. Seat dust boot in caliper with Installer Tool C-4842 and Tool Handle C-4171, or equivalents.
9. Replace caliper bleed screw if removed.
Disassembly
1. Remove caliper and brake shoes.
2. Remove mounting bolt boots and bushings from caliper.
