Grand Cherokee 2WD L6-4.0L VIN S (1997)
HCU/CAB Assembly
7. Remove HCU/CAB bracket mounting nuts.
8. Remove HCU/CAB assembly from the vehicle.
9. Remove bracket bolts from the HCU/CAB assembly.
Installation
1. Install bracket onto the HCU/CAB assembly.
2. Install HCU/CAB assembly in the vehicle and tighten mounting nuts to 12 Nm (9 ft. lbs.).
3. Install the brake lines to the HCU and tighten to 16 Nm (12 ft. lbs.).
4. Install CAB harness connector and push-in connector release.
5. Install steering gear shield.
6. Install windshield reservoir and mounting bolts.
7. Install air cleaner housing.
8. Install negative battery cable to the battery.
9. Bleed complete brake system.
