Grand Cherokee 2WD L6-4.0L VIN S (1997)
Cargo Lamp: Service and Repair
Cargo Lamp
REMOVAL
1. Insert a flat blade screwdriver in slots provided at lower portion of lens.
2. Rotate screwdriver upward until lens snaps out of housing.
Cargo Lamp
3. Remove lens from housing.
4. Remove screws attaching liftgate opening upper trim panel/cargo lamp to liftgate opening roof panel.
5. Separate trim panel from roof panel.
6. Disengage electrical connector for cargo lamp.
INSTALLATION
1. Position trim panel/cargo lamp at liftgate opening.
2. Engage electrical connector for cargo lamp.
3. Install screws attaching liftgate opening upper trim panel/cargo lamp to liftgate opening roof panel.
4. Position lens on cargo lamp and snap into place.