jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Relays and Modules - Body and Frame > < Antenna Relay|Description and Operation|Page 7
Page 1
background image

Antenna Relay: Service and Repair

REMOVAL

WARNING:  ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the fuse access panel by unsnapping it from the right cowl side trim panel.

Right Cowl Side Trim Panel Remove/Install

3. Remove the push-nut that secures the right cowl side trim panel to the junction block stud.
4. Remove the two screws that secure the right cowl side trim panel to the right front door opening trim.
5. Remove the right cowl side trim panel.
6. Unplug the antenna relay from the junction block.
7. Install the antenna relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
8. Connect the battery negative cable.
9. Test the antenna relay operation.

10. install the right cowl side trim panel and the fuse access panel.

Relays and Modules - Body and Frame > < Antenna Relay|Description and Operation|Page 7