jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Sensors and Switches - Restraint Systems > < Diagram Information and Instructions|Page 7496
Page 1
background image

Seat Belt Reminder Lamp: Testing and Inspection
Testing

The diagnosis found here addresses an inoperative seat belt reminder lamp condition. if the lamp comes on and flashes following its display function (for
about seven seconds after the ignition switch is turned to the On position), refer to the diagnosis for the airbag indicator lamp. 

WARNING:  ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.

If the seat belt reminder lamp fails to light during its display function, replace the seat belt reminder lamp bulb with a known good unit. If the reminder
lamp still fails to operate, diagnosis of the lamp, and the instrument cluster circuitry should be performed with a DRB scan tool.

Sensors and Switches - Restraint Systems > < Diagram Information and Instructions|Page 7496