Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Engine Block Heater > Component Information > Service and Repair > Engine Block Heater - Removal > Page 2500

Page 1
background image

Engine Block Heater: Service and Repair
Engine Block Heater - Installation

3.7L ENGINE

1. Thoroughly clean core hole and heater seat.
2. Insert heater assembly with element loop positioned upward.
3. With heater seated, tighten center screw securely to assure a positive seal.

CAUTION: To prevent damage, the power cord must be secured in it's retaining clips, and not positioned so it could contact linkages or 
exhaust manifold.

4. Connect power cord to heater.
5. Lower vehicle.
6. Fill cooling system See: Cooling System/Service and Repair.

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Engine Block Heater > Component Information > Service and Repair > Engine Block Heater - Removal > Page 2500

[PREV PAGE] [NEXT PAGE]