Workshop Repair Manuals

Jeep Workshop Manuals

[PREV PAGE] [NEXT PAGE]

jeep Workshop Repair Guides


Grand Cherokee 2WD V6-3.7L (2008)

Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > Spark Plug > Component Information > Service and Repair > Spark Plug - Removal

Page 1
background image

Spark Plug: Service and Repair
Spark Plug - Removal

REMOVAL - EXCEPT 4.7L V-8

Each individual spark plug is located under each ignition coil. Each individual ignition coil must be removed to gain access to each spark plug. Refer to
Ignition Coil Removal for procedures.

1. Remove necessary air filter tubing and air intake components at top of engine and at throttle body.
2. Prior to removing ignition coil, spray compressed air around coil base at cylinder head.
3. Prior to removing spark plug, spray compressed air into cylinder head opening. This will help prevent foreign material from entering combustion

chamber.

4. Remove spark plug from cylinder head using a quality socket with a rubber or foam insert. Also check condition of ignition coil O-ring and replace

as necessary.

5. Inspect spark plug condition.

Engine, Cooling and Exhaust > Engine > Tune-up and Engine Performance Checks > Spark Plug > Component Information > Service and Repair > Spark Plug - Removal

[PREV PAGE] [NEXT PAGE]