Jeep Workshop Manuals
Grand Cherokee 2WD V6-3.7L (2008)
Maintenance > Fluids > Fluid - A/T > Component Information > Technical Service Bulletins > Maintenance - Fluid Flushing Information > Page 1973
Transmission (CVT) and WG vehicles equipped with a diesel engine (sales code ENF) and a W5J400 or NAG1 transmission (sales code DGJ).
ATF+4(R) - (Type 9602) is being used as factory fill for Chrysler Group automatic transmissions. ATF+4(R) is recommended for all vehicles equipped
ATF+4(R) must always be used in vehicles that were originally filled with ATF+4(R). DO NOT USE ANY OTHER FLUID.
ATF+4(R) is backward compatible with ATF+3, ATF+2, and ATF+. Additionally, ATF+4(R) can be used to top off vehicles that used ATF+3,
If ATF+4® is used to service models originally filled with ATF+3, ATF+2, and ATF+ the fluid maintenance schedules listed for that model does not
In general terms, If ATF+, ATF+2 or ATF+3 was the recommended fluid, it is now recommended to use ATF+4®
Better anti-wear properties
Improved rust/corrosion prevention
Retains anti-foaming properties
Superior properties for low temperature operation
Mopar ATF+4(R) has exceptional durability. However, the red dye used in ATF+4(R) is not permanent; as the fluid ages it may become darker or appear
This bulletin is supplied as technical information only and is not an authorization for repair.
|[PREV PAGE] [NEXT PAGE]|