Grand Cherokee 2WD V6-3.7L (2008)
NOTE: LHD model with 5.7L engine shown. RHD model and other engines similar.
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system See: Heating and Air Conditioning/Service and Repair/Refrigerant System Recovery.
3. Remove the air cleaner housing, air intake tube and the resonator (if equipped) See: Filters/Air Cleaner Housing/Air Filter Element/Service and
Repair/Removal .
4. Remove the nut (3) that secures the A/C suction line (2) and the A/C liquid line (10) to the A/C expansion valve (1).
5. Disconnect the A/C suction line from the A/C expansion valve and remove and discard the O-ring seal.
6. Remove the nut (1) that secures the A/C liquid line (2) to the A/C receiver/drier (3).
7. Disconnect the A/C liquid line from the A/C receiver/drier and remove and discard the dual-plane seal.
8. Disengage the two liquid line retainer clips (4) from the right frame rail (3). If required remove the clips from the A/C liquid line.
9. Disconnect the A/C liquid line (1) from the A/C expansion valve (2) and remove and discard the O-ring seal.
